Topic 1.7B · Energy Resources, Efficiency and Power
Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.
Choose energy resources with evidence—not slogans—then calculate efficiency and power with matching quantities and disciplined units.
Core resource masterySupplement efficiencyATP power evidenceInteractive notebook
Classify each resource, then explain how its energy reaches a generator or useful output.
1
The complete syllabus map
Renewable and non-renewable resources
Classify each resource, then explain how its energy reaches a generator or useful output.
A renewable resource is replaced naturally as it is used. A non-renewable resource is finite on the timescale of human use.
Renewable
Biofuels, hydroelectric, waves, tides, geothermal, solar and wind.
Non-renewable
Fossil fuels—coal, oil and natural gas—and nuclear fuel.
Compare methods using the criterion named in the question, not a memorised generic list.
Resource
Initial store or input
Typical useful route
fossil / biofuel
chemical store
heating → steam → turbine → generator
high water
gravitational potential store
flowing water → turbine → generator
wind / waves / tides
kinetic and gravitational changes
moving fluid → turbine/mechanism → generator
geothermal
internal energy of hot rocks
heating → steam → turbine → generator
nuclear fuel
nuclear store
heating → steam → turbine → generator
solar cell
electromagnetic radiation
direct electrical output
solar heating panel
electromagnetic radiation
heating water
Interactive · Resource Classifier
Which resource is non-renewable?
Classification mnemonicFossil + nuclear = finite
Everything else in the listed set is renewable—while still having costs, site limits and environmental impacts.
Renewable ≠ harmless. Dams flood land, turbines affect habitats and views, biofuels use land, and solar/wind equipment needs materials.
2
Three families of generation
Water, wind and solar power
Solar cells transfer radiation energy directly into electrical energy; solar water panels heat water instead.
Wind uses moving air; geothermal uses energy from Earth’s interior.
Water from a high reservoir flows through a turbine connected to a generator.
Hydroelectric
Water behind a dam has a gravitational store. Flowing water turns a turbine linked to a generator. Output can often be started rapidly.
Waves and tides
Moving water drives turbines or mechanical systems. Tides are predictable; waves depend more strongly on weather.
A tidal barrage or submerged turbine uses predictable tidal water movement.Moving air turns the blades; the rotating shaft drives a generator.
Wind chainAir → blades → shaft → generator
Use verbs: moving air turns blades; the shaft drives the generator.
Solar cells generate electrical power; solar heating panels transfer radiation energy to water.
Device
Useful output
What it does not need
solar cell
electrical power
no boiler, turbine or generator
solar heating panel
hot water / increased internal store
does not generate electricity by itself
Interactive · Component Check
What does a rotating turbine drive?
Describe command: a list of components is not enough. Link them causally: water/wind turns turbine; turbine shaft drives generator; generator transfers energy electrically.
Pause · explain it yourself
Give a power-generation example that needs no boiler.
Compare, then improve
Wind turns turbine blades driving a generator, or falling water drives a hydroelectric turbine.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
3
Boiler, turbine, generator
Boiler, turbine and generator
Fuel-fired stations transfer chemical energy to internal energy, produce steam, turn a turbine and drive a generator.
Nuclear stations start with nuclear energy but may share the steam–turbine–generator chain.
Hydroelectric generation uses falling water to drive turbines without a fuel boiler.
Where a boiler is used, state that heating produces steam; steam turns the turbine; the turbine drives the generator.Chemical energy from a fuel is transferred by heating; steam turns a turbine and generator.
The source store decreases.
Energy is transferred by heating to water in a boiler or heat exchanger.
Steam moves and turns the turbine.
The turbine shaft drives the generator.
The generator transfers energy electrically to the circuit.
Nuclear fuel heats water; steam turns a turbine connected to a generator.Thermal energy from hot rocks heats water; steam can drive a turbine and generator.
Source
Store/input
Distinctive issue
fossil fuel
chemical
finite; carbon dioxide and air pollutants
biofuel
chemical
renewable only if regrown sustainably; land use
nuclear fuel
nuclear
finite; radioactive waste; large steady output
geothermal
internal energy of rocks
renewable; restricted to suitable geology
Generator trap: a generator does not create energy and is not the heat source. It is driven mechanically and transfers energy electrically.
Use “steam turns the turbine.” “Steam makes electricity” skips the generator and loses causal marks.
4
Examiner-grade evaluation
Comparing energy resources
Renewable means naturally replenished on a useful human timescale; it does not mean available continuously.
Wind and solar inputs vary with conditions.
A fuel station can often respond to demand but uses fuel and can have environmental effects.
Explain advantages with consequences: a reservoir stores water for peak demand, but floods land and affects habitats.
Nuclear generation has low direct carbon dioxide emissions during operation but creates radioactive waste requiring management.
Biofuel impacts depend on land use and replacement.
Avoid declaring any resource impact-free or best for every location.
Compare methods using the criterion named in the question, not a memorised generic list.
Use the numerical evidence and the decision criterion; avoid claiming one method is universally best.
Balanced recommendation
“Site B is more predictable, but its coastal impact is high.
Site A has greater mean output but is less available.
Choose B only if habitat impact can be reduced and reliable supply is the priority; otherwise combine A with storage or another controllable source.”
Read what the graph actually shows: variation supports a statement about availability or reliability, not cost or pollution.
Evidence trap: a changing output graph supports “variable output.” It does not prove the method is cheap, renewable or pollution-free.
Comparative language: write “more predictable than,” “lower operational carbon dioxide emissions than,” or “requires a larger area than.” A free-floating fact may not answer the comparison.
Pause · explain it yourself
Why can a renewable source still need storage or backup?
Compare, then improve
Its input may be intermittent while demand continues when wind or sunlight is insufficient.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
5
Where the resource ultimately comes from
Resources derived from the Sun
Sunlight drives winds, the water cycle and biomass.
Geothermal, nuclear and tidal resources are important exceptions to the solar-origin classification.
Mnemonic: GNT are the three exceptions—geothermal, nuclear and tidal.
Exception mnemonicG-N-T
Geothermal · Nuclear · Tidal are not mainly derived from solar radiation.
Use causal verbs in order: heats unevenly, creates pressure differences, air moves, blades turn, generator operates.
Wind and waves
Uneven solar heating creates pressure differences and wind; wind transfers energy to water waves.
Hydroelectric
Solar heating drives evaporation and the water cycle, returning water to high gravitational stores.
Biofuels
Photosynthesis stores energy from solar radiation chemically in plants.
Fossil fuels
The chemical store came from ancient organisms whose energy ultimately came from photosynthesis.
Water from a high reservoir flows through a turbine connected to a generator.
Interactive · Solar-Origin Exception
Which one is not mainly from solar radiation?
Explain, not name: for wind, include uneven heating → pressure differences → moving air. For hydroelectric, include evaporation/water cycle → water at height.
6
Energy in the Sun
Fusion and the Sun
Fusion releases energy in the Sun. Large-scale controlled fusion for electricity remains an area of research.
Nuclear fusion combines light nuclei and releases energy. Fusion in the Sun is the source of its radiation.
What is established
Fusion releases energy in the Sun. Solar radiation then drives many energy resources on Earth.
What is being investigated
Research seeks controlled fusion systems that can produce electrical energy on a large scale.
Mnemonic: GNT are the three exceptions—geothermal, nuclear and tidal.
Fusion ≠ fission. The Sun releases energy by fusion. Present nuclear power stations use fission of nuclear fuel.
Calibrated claim: write “research is being carried out to investigate large-scale electrical generation from fusion.” Do not claim it is the standard commercial method.
Quick Check · Why is wind indirectly a fusion-powered resource?
Fusion releases energy in the Sun; radiation heats the atmosphere unevenly; pressure differences cause air to move.
7
The useful fraction
Efficiency
A powerful machine may be inefficient if it dissipates a large fraction of its input.
Successive stages multiply useful fractions because only one stage’s output becomes the next stage’s input.
The overall fraction cannot exceed either stage’s fraction in such a chain.
$\text{efficiency}=\dfrac{\text{useful energy output}}{\text{total energy input}}$
$\text{efficiency}=\dfrac{\text{useful power output}}{\text{total power input}}$
Multiply by 100 for a percentage. A decimal answer of 0.65 is the same as 65%.
Use matching quantities: energy with energy, or power with power. Multiply by 100 only for a percentage.
Worked: energy form
Efficiency $=(520/800)\times100=65\%$.
Dissipated energy $=800-520=280$ J.
Use matching quantities: energy with energy, or power with power. Multiply by 100 only for a percentage.
Ratio mnemonicUseful on top, total below
Energy/energy or power/power—never energy divided by power unless you are intentionally calculating a time.
Interactive · Efficiency Engine
Energy form
Interactive · Useful Power Decoder
Input power × decimal efficiency
Percent trap: 75% becomes 0.75 in a calculation. Dividing by 75 instead of 0.75 makes an input 100 times too small.
Reasonableness check: efficiency must lie from 0 to 1, or 0% to 100%. A larger result signals an inverted ratio or unit mismatch.
8
How fast energy is transferred
Power
PowerEnergy transferred per time: P = E/t, with one watt equal to one joule per second.
EfficiencyUseful output divided by total input, using either energies over the same interval or corresponding powers.
Multiply the ratio by 100 for a percentage.
Power is defined as the rate of doing work or the rate of transferring energy.
$P=\dfrac{W}{t}=\dfrac{\Delta E}{t}$
Power is the rate of doing work or transferring energy. Convert the time to seconds for watts.
Worked: direct rate
$P=1800/45=40$ W.
For the same work, the machine taking less time has the greater power.
MeaningMore joules each second = more watts
$1$ watt $=1$ joule per second. Greater power does not automatically mean greater efficiency.
The gradient ΔE/Δt is power. A steeper section represents a greater rate of energy transfer.
Interactive · Power Calculator
Energy divided by time
Interactive · Useful-Energy Builder
Power × time × efficiency
Prefix
Meaning
Example
kilo, k
×1000
2.5 kW = 2500 W
mega, M
×1 000 000
3.2 MW = 3 200 000 W
minute
×60 s
2.0 min = 120 s
Graph link: on an energy–time graph, gradient $ΔE/Δt$ is power. Steepest means greatest power.
Pause · explain it yourself
Two motors perform the same useful work, one in half the time. What doubles?
Compare, then improve
Useful power doubles. Efficiency cannot be found without input information.
Check your physical idea, the conditions and any units. Edit your answer if a step is missing.
9
Alternative to Practical
ATP Lab Lens: measure useful power and efficiency safely
Use a modest secure load, keep hands clear of moving string, switch off before adjustments, repeat and average.
Practical mnemonicM-H-T-I-R
Measure Mass · vertical Height · matched Time · Input energy/power · Repeat.
$P_{useful}=\dfrac{mg\Delta h}{t}$ and $\text{efficiency}=\dfrac{P_{useful}}{P_{input}}$
Measurement
How
Critical detail
mass
zeroed balance
complete moving load
height
metre rule
vertical rise, same reference point
time
timer/video
same interval as input measurement
input
joulemeter or power sensor
zero/check range; matched start/stop
Read what the graph actually shows: variation supports a statement about availability or reliability, not cost or pollution.Select the relevant relationship before substituting values.
Solar-cell variables: vary one defined angle; measure output power; control lamp distance, source setting, cell area and ambient light. Repeat after readings settle.
Weak method
Why weak
Fix
time and input measured over different intervals
ratio is invalid
use common start/stop markers
load changes between trials
useful work changes
control complete load and height
one run
spread hidden
repeat, mean and report range
lamp distance drifts
incident radiation changes
mark fixed positions and allow stable output
Safety: use supplied low-voltage classroom equipment and modest secure loads, keep hands clear of pulleys, switch off before adjustment, stabilise lamps and avoid touching warm surfaces.
Evaluation: an efficiency slightly above 100% is not “very efficient”; it exposes measurement error, mismatched intervals or incorrect input data.
10
One-page visual recall
Topic 1.7B Master Sheet
Classify each resource, then explain how its energy reaches a generator or useful output.
Equation bank
efficiency = useful energy / total energy
efficiency = useful power / total power
$P=W/t=ΔE/t$
$E=Pt$
Memory board
Fossil + nuclear = finite
Air/water → turbine → generator
RA RSE · compare methods
GNT · solar exceptions
Useful on top · efficiency
J each second · power
Mnemonic: GNT are the three exceptions—geothermal, nuclear and tidal.Where a boiler is used, state that heating produces steam; steam turns the turbine; the turbine drives the generator.Use matching quantities: energy with energy, or power with power. Multiply by 100 only for a percentage.Power is the rate of doing work or transferring energy. Convert the time to seconds for watts.
If the question asks…
Answer route
how electricity is generated
source → heating/flow → turbine → generator
advantage/disadvantage
compare the named pair using RARSE
solar origin
trace the causal chain; remember GNT
fusion
Sun releases energy by fusion; large-scale use is researched
efficiency
matching useful ÷ total; decimal or percentage
power
convert units; energy/work ÷ time
combined problem
find useful power, then multiply by time—or reverse
Final answer audit: renewable claim qualified? named comparison? causal generator chain? GNT exception? fusion not fission? matching ratio? percent converted? k/M and minutes converted? watt or joule attached?
Interactive mastery: 0 / 6 explored
Use every explorer once, then redo one efficiency–power chain without notes.